Envair Environmental Air Solutions
  • Banner

3nine oil mist collector

3nine oil mist collectors - High performance low maintenance

3nine’s oil mist collectors has the most advanced and sophisticated technology to separate oil mist and oil smoke within the metal working industry.
With a patented solution based on centrifugal separation, 3nine’s products are close to maintenance free as the technology does not collect particles but separates them. We have probably the highest purification rate on the market, which contributes to a clean and healthy working environment

REMBEĀ®, Inc.

REMBE®, INC. continues a 35+ year tradition of providing top-quality explosion protection and process safety products and services to every industry. Our explosion protection, process safety and measurement products are manufactured in accordance with IAW National and International Certifications, Standards and Norms (i.e., NFPA, ASME VIII, ATEX, DIN-EN ISO 4126-2, - 4126-6, AD2000-Merkblatt A1, PED, Promtomnadzor, GOST-R, GOST-K, CML, API, BS2915, KTA). The company is certified according to DIN-EN ISO 9001:2008.

CUSTOMER SERVICE

REMBE®, INC. has dedicated representatives who are prepared to consult with you and provide you with the necessary engineering, design and sales support to develop the best explosion protection or process safety solution.solution for your manufacturing facility.



 

 

 

 

 

 

facility

Industrial Air Technology Corp. services the industrial fan market with a complete line of centrifugal fans. We understand the rigorous requirements particular to industrial air movement applications. The fans we produce are designed and built for users who value quality craftsmanship and reliable performance.The Industrial Air Technology standard product offering includes backward inclined, industrial exhauster, radially tipped, and high pressure/turbo series fans.

Dust extraction for composite materials

Improve work conditions, optimize uptime and safeguard production with Nederman dust extraction solution

Products made of composite materials are increasing strongly in number and include everything from simple features to advanced components. When these materials are cut, milled, machined or polished, they release dust, particles and fibres. The particles are often small enough to enter human lungs or, especially when the material is fibreglass, the dust can penetrate the skin and cause an eczema-like reaction. Lubricants and fluids used in the production of composite materials also generate organic substances and gases that are dangerous when inhaled. 

A clean production environment is essential fot the quality and finish of the product. The smallest particle of dust can have devastating consequenses. Smooth, dust-free surfaces are decisive for achieving maximum adhesion when joining components made of composites. This is why the world's leading car and boat manufacturers buy equipment from Nederman to ensure best results.

 

 

Explosion Proof Vacuum Systems explosion proof vacuum systems

A solid piece of any given material is normally safe and non explosive. However, creating a fine dust from the very same material could make it combustible; compare a solid piece of wood to wood dust! Furthermore the finer the dust particles are the more “explosive” they become! 

Many industries handle materials that are or can become explosive! When a combustible material is dispersed as a fine dust and combined with air and an ignition source the potential for a dust explosion increases. 

  • Some examples of combustible materials: 
  • Synthetic organic dust, such as plastic grinding dust, reinforced plastics and other composite materials, powder paint, cosmetics. 
  • Metal dusts – Fine dust of aluminium, magnesium, titanium, chromium. 
  • Organic dust from food industry, such as baking flour, soup powder, spices, sugar. 
  • Pharmaceutical – Large number of powders used in pharmaceutical industries are explosive.

In many parts of the world there have been a number of dust explosions that have destroyed factories, injured or killed people and resulted in production losses and high costs! All of this can be avoided by using the appropriate equipment.

 

explosion proof fans

Explosion Proof Fans

Nederman NCF DX are powerful central fans with a robust construction of welded steel. The NCF DX is approved for explosive dust in zone 22 in accordance with ATEX directives 94/9 Group 2, Category 3. 

New York Blower Industrial Blowers and Fans


New York Blower is an industry leader in manufacturing premium-quality, engineered fans and blowers to the industrial and OEM marketplace. NYB carries the most complete product portfolio in the business and our products are distributed through an extensive worldwide network of over 300 experienced and knowledgeable representatives.

 

Industrial Blowers

New York Blower Type HP Pressure Blowers are designed for applications that can be handled in either induced-draft or forced-draft configurations. Some applications include combustion air, cooling systems, chemical process, glass-blowing, and system exhaust. Wheels can be constructed of steel (high-strength 950X/960X alloy), aluminum alloy, or austentitic-ferritic stainless steel containing 40-50% ferrite in an annealed condition (Alloy 2205). Some construction features include a taper-lock hub for easy wheel removal, precision-balancing for wheels prior to assembly, choice of three inlet configurations, an industrial finish of medium-green enamel, and lifting eyes. Low-leakage construction is also available on some models.

 

Industrial Fans

New York Blower AF Fans extend the pressure capabilities of backward inclined fan designs to the higher pressures found in heavy industrial-process applications such as boiler forced-draft, combustion air, solvent recovery and recirculating air.

Designing And Building Dust Collectors, Mist Collectors, And Systems For Industry Since 1938.

Aget markets its products through a network of experienced manufacturers' representatives in the United States, Canada and Mexico for a wide variety of dust collection applications. Typical example are woodworking, metalworking, powdered chemicals, pharmaceuticals, food and agricultural processing, among many others. DUSTKOP products are also used for many OEM applications, and are installed in many vocational training centers and school work shops.

The basic DUSTKOP is a cyclone type dust collector, which pulls contaminated air into the unit at high velocity, creating a vortex or cyclone action. Centrifugal forces separate the dry particles from the air stream, and they drop via gravity into a drum or hopper. Clean air can then be recirculated back into the plant, or vented to the outdoors. The DUSTKOP is also offered in a 2-stage system which includes an after-filter unit attached to the cyclone separator for removal of sub-micron particles as small as 0.3 microns.

 

 

Cyclone Separators

The cyclone separator is one of the most efficient dust collectors available for its cost. The SN Series cyclones shown here are equipped with top mounted motors and fans which pull contaminated air into the cyclone through the lower side opening. The centrifugal action of the cyclone, created by rapid rotation of the high velocity air stream, forcibly precipitates the dust out through the bottom of the cyclone and into a suitable container for the application. Cleaned air is released through the upper side outlet.

 

 

 

 

 

BagHouse Dust Collectors

For filtering fine dust that may pass through cyclone dust collectors or other primary dust collection device. After Filters permit recirculation of cleaned air where allowed for non-toxic applications. They are available open for indoors, or enclosed for outdoor locations. Motor powered filter shakers are standard on the FT64, FT164, FT88, and FT188 series units, and optional to replace the standard manual shakers on all other sizes.

Cotton sateen filter tubes are standard, and optional Napped Cotton Sateen filters are available for fine dust collection applications, with efficiencies down to 0.3 microns possible. Other optional fabrics are available. Other options: automatic shaker control timers, pressure relief panels, explosion proof shaker features, and HEPA filter adapters or HEPA modules for "polishing" discharge air. Larger baghouses are shown below.

 

 

 

Dust Collectors

Aget Filterkop Dust Collector

A Filterkop dust collector will clear the air of very fine dusts, and keep it that way. Utilizing a permanent fabric filter system (baghouse), the Filterkop removes "fines" as small as 0.3 microns from the airstream, and returns cleaned air back to the workplace, or to vent as desired. The system requires no cartridge filters, or cartridge replacement expense.

The World's Fastest Ducting.™Nordfab Ducting clamp together duct work, automatic slide gates and diverter valves

  • Easy & Fast to install, just clamp together, no rivets, screws or welding needed. 45% less labor to install.
  • Re-useable, easy to use and easy to move as your needs change.
  • Easy to clean out, can be easily removed, cleaned out, then replaced without tools.
  • Quick-Fit is available in galvanized, aluminum, and stainless
  • 45% less downtime for installation
  • Leak-tight laser welded seams, instead of lock-form or spiral duct - which leak badly and allow debris to snag on the duct interior.
  • Adaptable to your existing ductwork.

 

Nordfab automatic slide gates

Norfab Automatic Slide Gates

Automatic energy saving blast gates operated by double-acting compressed air cylinders. Cylinders are controlled by electrically-connected solenoid to machines or remote switch. Gates are constructed of galvanized metal and a special sealing device that reduces air loss and friction in operation. Available in sizes 3" diameter to 22" diameter, 120V control circuit, and 75psi minimum air pressure.

 

 


Norfab Diverter Valves

Nordfab Diverter Valves:

Economical and efficiency method of diverting flow of material or air. 
Highly efficient method of diverting flow of materials or airflow.
4 " to 24 " in diameter
Manual or automatic operation.

Micro Air portable dust collectors and air cleaners


Micro Air
manufactures a full line of industrial air cleaners, dust collectors, clean air booths, environmental booths, downdraft tables and commercial air cleaners. Let us show you how Micro Air can boost productivity, increase safety, and reduce maintenance costs.
 

 

Dust Collectors
Micro Air® dust collectors are engineered from the ground up with innovative design, and features that provide what counts most in a dust collector: functionality. From fine dust to coarse particulate, we can help make your plant a cleaner and a more friendly work environment.

 

Industrial Air Cleaners
The industrial models offer three types of filtration. Media units utilize a series of filters to collect the particulate. These include pre-filters, media bag filters, HEPA filters, and charcoal modules. The unit can be configured with any combination of media to most effectively capture the specific particulate or fume.

 

Downdraft Tables
Micro Air Downdraft Tables offer you the flexibility to configure a work table to exactly meet your needs, space and worker preference. Downdraft tables provide your clean air solution in a variety of applications including grinding, plasma/torch cutting, sanding, welding smoke, deburring, or fumes.

 

Source Capture Arms
Micro Air® model SCA exhauster arms are used on a wide variety of fume and particulate exhaust applications. Designed to control airborne pollutants at their generation point, SCA arms can be equipped with a motor to vent outside, or used with Micro Air® air cleaners or dust collectors to filter the material and then return fresh air back into the facility.

 

Portable Collectors
Micro Air Portable Air Cleaners are your clean air solution to multiple industrial applications! Micro Air equipment, engineered with versatility and user-friendly features, are sold by a national network of trained air cleaning professionals. In addition, we provide factory support including design consultation, CAD drawings and technical assistance at no charge to the end user.

 

Clean Air Booths (Environmental)
The Micro Air Clean Air Booth (CAB) is a unique blend of simple modular construction and leading edge air cleaning technology. It's a self-contained, ductless system that provides maximum manufacturing flexibility while protecting workers from the airborne hazards associated with applications such as cutting, welding, grinding, sanding, finishing, and multiple other industrial operations that produce airborne contaminants.

 

 

 

 

Micro Air
PO Box 1138
3025 May Ave.
Wichita, KS 67201
USA

Our Service Areas

Colorado: Denver | Colorado Springs | Aurora | Lakewood | Fort Collins Montana: Helena | Billings | Missoula | Great Falls | Bozeman

New Mexico: Santa Fe | Albuquerque | Las Cruces | Rio Rancho | Roswell Wyoming: Cheyenne | Casper | Laramie | Gillette | Rock Springs
Back to top